SUB-1030511 Scotts Yamaha YZ and WR Sub Mount

We've   machined this SUB mount to give you 2 possible handlebar mounting positions.   Position 1 is in the stock location and position 2 is 10mm forward. Picture   may not be your exact model but depicts the same mounting  configuration
"SUB" mount stands for Stabilizer Under Bars, originally   designed for raising the bars. This concept allows more room for other   equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers   and yet still retain the quick access for adjusting the stabilizer. This is   also good for the taller rider who wants his bars a little higher, as it   raises the bar location approximately 11-25mm, depending on the model of   bike. In some cases, you might consider a lower bend handlebar bend at the   same time, unless you are trying to achieve a higher bar height along with   your stabilizer installation. We can also help you with other handlebar   choices to match your desired setup, as we have a full selection of   handlebars to choose from on this website. The SUB mounts are only available   on certain models based on the physical limitations of mounting in this area.   Each SUB mount comes complete with all necessary parts, hardware and   "Step by Step" pictured instructions. If you have any questions,   feel free to call or email us. The Photo attached here may be a generic photo   to show you the basic components in the kit, but may not be showing the exact   kit for your specific bike