FRSP 4351 Series 43.2 x 508mmRace Tech Fork Springs

Springs are the most critical element of suspension performance. Ideally they should be matched to suit the combined weight of both bike and rider. Correct spring rate will ensure that the bike settles to the ideal ride height to determine the final geometry of the motorcycle.(Rider Sag)

Springs are available in different wire gauges and materials. The best springs are simply manufactured from the highest quality chrome silicon wire and receive hardening and prestressing treatments.

Race Tech springs are not only made using the best materials and techniques but they are also 100% tested to ensure accuracy. The industry tolerance for spring manufacturing is plus or minus 5%. This is not close enough for obtaining perfect tuning requirements so Race Tech demands that each spring is marked and tested at its correct rate.

In most cases Race Tech springs don't cost any more than lesser quality units yet have so much more to offer the most meticulous tuner or rider. Race Tech entrusts Eibach to manufacture springs for their suspension outlets. Eibach has one of the finest reputations for quality and attention to detail in the world. Combine this with Race Tech's stringent demands and technical requirements and you are assured of the finest springs on the market.

So what makes a good spring?

Ideally it should be;

• Made from the highest quality chrome silicon spring steel
• Press a high stiffness to mass ratio.( lightweight )
• Be shot peened, heat treated and preset to length.( set to solid )
• 100% tested prior to supply to the end user.

There is a variety of spring manufacturers on the market but for the fussiest riders there should be only one choice.