Scotts Gas Gas 2025 Above Bar Hardware

This is the mounting hardware kit - Frame Bracket, Bar Clamp, Cones

If you have a Scotts stabilizer and want a “Bolt-On” mounting solution, the DM-Bolt Kit is just for you. Scotts Performance DM-Bolt “Dirt Mount” Kits are a conventional mounting (Above Bar) solution.

This kit will suit bikes with Billet Triple Clamps

• KTM SX/SXF/XC/XCF 2023-2025
• Husqvarna FC/TC 2023
• Husqvarna All Models 2024-2025
• Gas Gas Special Edition 2025

The Scotts Above Bar Bolt on Tower is an integral part of the stabilizer application. It is the critical connection between the stabilizer and the frame of the motorcycle. This is an Above Bar bolt-on tower that will pair perfectly when running your Scotts Stabilizer above the handlebars. Bolt on towers are available for most late model bikes.

Scotts Performance Above Bar Bolt on Towers are precisely engineered and manufactured from an aircraft grade aluminum alloy to fit each application perfectly for an easy bolt-on assembly. The grey type 2 anodizing process is a strong and durable finish that should last the lifetime of the motorcycle.

Shock Treatment is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of Scotts stabilizer mounting applications and replacement parts for your Scotts Steering Stabilizer.

SOME SCOTTS BOLT-ON TOWERS MAY REQUIRE ADDITIONAL FILING OR DRILLING TO ENSURE PROPER TOWER FITMENT. Most applications are a simple install for any novice mechanic. Some bolt-on towers require additional hardware in order to mount properly. Some models you may need to use special rubber cones, special bar mount hardware or indexing the bar mount bolts to provide the proper clearance between the tower and the bar mount hardware. All towers come with complete step by step installation instructions. The tower pin should be free floating so be sure to clean and lube it regularly.

SPECIAL NOTES: We offer two different kits for this year range. It is very important that you select the correct triple clamp your bike has.

The Black or Orange Anodized Billet Triple Clamp models require additional hardware to ensure adequate clearance between the frame bracket and the hardware on the bottom side of the triple clamp. The SX/SXF/XC/XCF & Factory Edition, Hard Enduro & 6 Days models come with billet black or orange anodized triple clamps. 

The Forged – Cast Triple Clamp, typically on the EXC & XCW do NOT need the additional hardware.

• NOTE:  Clean Speed Cable Guideis strongly recommended to ensure that the throttle cable does not get hung up on the upright portion of the frame bracket!